Electronic Material Tensile Test Equipment for brick is a company designed to aluminum alloy as the main machine, it is not only small, widely used ,less space, elegant appearance, and with rollable base station, makes it all very convenient. In particular, suitable for production line control of product quality testing equipment. This series is mainly used in the test load is less than 1000N non-metallic and metallic materials within the test.
Electronic Material Tensile Test Equipment is suitable for all kinds of textile, rubber, plastics, synthetic leather, tape, adhesive, plastic film, composite materials, electronics, metals and other materials and products industry to do tensile, compression, bending, shear, peel (90 degrees and 180 degrees), tearing, two extensions (need to reprovision extensometer ) and other tests to determine product quality
"GB/T16491-1996 electronic universal testing machine"
Electronic Material Tensile Test Equipment widely used in wire and cable, hardware, electronics, packaging, printing, medical equipment, auto parts, textiles and leather, clothing footwear, rubber products, institutions of higher learning; research laboratories; inspection of arbitration, and technical supervision departments and other industries, is quality management, basic equipment character test.
| Model | Electronic Material Tensile Test Equipment |
| Max load | 50N,100N,200N,500N, 1KN, 2KN (optional) |
| Accurate grade | 1 grade /0.5 grade |
| Effective measuring range | Force from 0.2% to 100% (1grade) / from 0.4% to 100% (0.5 grade) |
| Measuring accuracy | Tolerance ±1% / tolerance ±0.5% |
| Tester resolution | Max load 1/200000, and constant resolution |
| Load sensor | Basic configurationsensormax load:from four sensors to choose one |
| Effective tensile stroke | 800mm (can be widened according to customers requirement ) |
| Effective testing width | 300mm |
| Testing speed | From 0.001 to 500mm/min |
| Accruacy of displacement measurement | Tolerance: ±0.5% / tolerance: ±0.2% |
| Safety | Electronic-limit protection |
| Testing platform moving device | Fast /slow ( two speeds to control), can jog |
| Return Back | Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation |
| Overload protection | Overload 10%,automatic protection |
| Fixture | A set of tensile fixture |
| Machine size | 650*360*2100mm (L*W*H) |
| Power system | Panasonic AC Servo Motor + Driver + high-precision ball screw |
| Temperature range | From normal temperature to 200 degree |
| Temperature display | Digital display |
| Inside space | 200*300*500mm (W*L*H ) |
| Cooling system | Compression from France |
| Power supply | 220V50HZ or according to the requirement |
| Power | 0.4KW ( depending on different demand of force, using different motor) |
| Weight | 150 Kg |
1. Good design.My company has been great emphasis on product appearance and development of many models with comparable foreign products are aluminum alloy surface, and electrostatic spray chart.
2. Force value digital LCD display, a discernible tension or pressure, LCD interface, easy to read.
3. Three types of units: N-Kgf-Lbf optional and can automatically swap.
4.LCD liquid crystal display with backlight, can be used in low-light environment.
5. Single determination, you can read the tension and compression peaks in both directions, and automatic and manual reset;
6,With travel limit and the overload stop function.
7. Desktop single-column structure is beautiful and delicate, seating operation, easy and natural.
